Brake Pads 101-The Ultimate Brake Pads Guide

The Ultimate Brake Pads Guide – Find The Right Brake Pads For You

If you’re shopping for Brake Pads or Brake Rotors, then you most likely have questions like:
what kind of brake should I need? Which is better disc brake or drum brake?
We have answers! Read this complete guide to parasol bases so you know what to buy.

1. What are Brake Pads?

Automotive brake pads are friction materials fixed to the brake drum or disc. The friction blocks inside the brake pads create friction when subjected to the added pressure, hence, slow down the vehicle.

A brake pad generally consists of steel plates, adhesive insulation and friction blocks.

see also:

What is a Car Brake system? What are Brake rotors?

2. Types of Brake Pads

Depending on the types of car brakes, brake pads can be classified as disc brake pads and drum brake shoes. Which one is better? Please refer to the article:

Disc Brakes VS. Drum Brakes

Depending on the brake pad materials, they can be divided into
asbestos brake pads
metallic brake pads
semi-metallic brakes
ceramic brake pads
high carbon fiber brake pads

More Details

3. How to Choose Brake Pads?

If you are considering how to choose brake pads, see also:

How are the brake pads made?

6 Ways To Choose Brake Pads

For more details about brake pads see also

How Much Do You Know About Car Brake?

4. When Should I Replace My Disc Brakes and Brake Pads?

Car owners’ safety is bound up with the braking system where the brake pad works with the brake rotors. we will look at brake disc replacement and maintenance.

The brake pad is the most critical safety component in the braking system as it is the decisive factor of the effectiveness of car brake. As brake pads are wearable, we need to keep an eye on their condition and know when to replace them.

There are 5 signs that warn you to replace your brake pads.

  1. miles you drive
  2. the thickness of brake pads
  3. noise
  4. mushy pedal
  5. brake warning light

see also:

5 Signs It’s Time To Replace The Brake Pads

How And When Should I Replace My Disc Brakes

5. How to Replace Brake Pads by Yourself?

Brake pads are car components that are easy to wear out. If you learn to change brake pads on your own, it will save you a lot of money and time. Do you know the steps to replace brake pads?

To replace the brake pads you need these tools: a jack, screwdriver, cross wrench, hammer, brake regulator, etc. Once you get all these tools, you can get started.

Step 1: Remove the wheel

Before lifting the car off the ground, you can easily loosen the fastening bolts as the large friction between the tires and the ground helps fix the tire. If you lift the car first, the bolts can be too tight to be unscrewed. Loosen the bolts by half a turn instead of unscrewing them completely and then jack up the car and remove the wheel. You can place the removed tire underneath the frame for extra safety, preventing the car from dropping all the way down in a worst-case scenario.

Step 2: Unbolt the caliper

Unscrew the two bolts holding the caliper in place. If you leave the caliper dangled by the brake line, you may damage your brake line. So you have to find a place to put your caliper where it is out of the way and there’s no pressure on the brake line. Then, you can remove the brake pads. Some cars have two iron pins to fix the brake caliper so you should remove them to take the whole clamshell off. After removing the caliper, you can remove the brake pads. To install new brake pads, you have to use a compressor tool to compress the piston all the way back into the caliper because new brake pads are thicker.

Step 3: Install the wheel back and test the brake

After replacing the brake pads, install the bolts or pins, put the wheels back and tighten all the nuts. Then you need to enter the car, start up the car, pump the brakes a few times until you get a firm pedal.

6. How to Care for Your Car: Brakes

Having good driving habits can greatly reduce the wear and tear on your brake rotors. Check brake pads regularly and change the brake pads in time to prevent them from becoming too thin which causes the brake rotor to wear out. Do not wash your vehicle immediately after driving at high speeds, preventing brake rotors from deforming due to the dramatic temperature change.

Worn-down brake rotors pose a risk to the driver. Knowing the wear indicators that tell you when and how to replace brake pads will help you drive safer. 

7. How Much Does It Cost to Replace Brake Pads?

Depending on the vehicle you drive, there can be a pretty big difference in pricing. The price of the brake pad depends on its manufacturing material and brand. Generally speaking, the replacement costs can range from $100 per axle up to $300 per axle. If your rotors need replacing, or if your brake calipers are seized and plus labor,  it doesn’t take long for the bill to add up to hundreds or even thousands of dollars.

If you consider replace your own brake pads and buy brake pads. You will save a lot of money. The premise is that you have the right tools and some mechanical expertise.

8. How to Import Brake Pads from China?

Brief steps:

Looking for a platform where you can buy Chinese auto parts

The B2B platform is suitable for large-volume wholesale purchases, and you will be dealing with direct manufacturers, and the quotations obtained are relatively more favourable, but small batches are generally difficult to accept. The B2C platform can support small-volume purchases, and the price is relatively expensive.

However, in the face of tariffs and freight, you have to consider whether you are profitable.

How to find a reliable Chinese auto parts manufacturer

You can search on search engines or B2B platforms by keywords such as “China auto parts”, “import auto parts from China”, “China auto parts manufacturer”, and “China auto parts exporter”. Get a batch of manufacturers for the products you need. 

More Details:

How to Import Brake Pads from China?

Contact Us

More Knowledges


Clutch Set for Chery 

LLEIDA clutch pressure plate is made of high-quality steel, and the spring plate is quenched and processed, and its strength and wear resistance are much higher than other ordinary spring plates…


Table of Contents